TLP 200/3,0 air handling units

629.55 ex VAT 629.55

Low noise level
Adjustable voltage control
Supply-air unit with heater
Easily removable inspection cover
G4 filter

A compact unit consisting of a fan, heater and filter in a galvanised sheet steel casing insulated inside with 50 mm of mineral wool. Rubber-sealed sleeve couplings. Neoprene sealing strips and toggle locks. Note that the fan must always be connected to 230 V. Fan run-on is not normally required. (Lowest air velocity 1.5 m/s). Max. output air temperature: 40 °C. The fan may be adjusted by either a transformer or a thyristor.

The heating element is most effectively controlled by a power regulator, pulser and duct sensor.

The filter should be checked regularly and replaced at least twice a year.

Out of stock

> Contact

Important Information Regarding the Coronavirus:

Aclimat Consulting are operating with reduced staff and We will endeavour to answer all emails and process orders as quickly as possible but please be patient as it may take a little longer, we will do our best to keep to our normal timescales.


Voltage 400 V
Frequency 50 Hz
Phase 2 ~
Airflow range 170-518 m³/h
Enclosure class IP44
Weight 40,2 kg
Heating type Electric
Input power, electrical heating battery 3 kW
Current, electrical heating battery 7,5A
Supply fan
Voltage 230 V
Phase 1 ~
Current 0,45 A
Input power (P1) 103 W
Fan impeller speed 2578 r.p.m.
Max. temperature of transported air 70 °C
Insulation class B
Supply filter
Filter class G4
Sound data
Sound pressure level at 3 m (20m² Sabin) 46,2 dB(A)


A- 531 mm
B- 231 mm
C- 529 mm
D- 525 mm
E- 794 mm
F- 745 mm
øG- 200 mm
H- 740 mm
air handling units - drawing TLP 200/3,0

Additional information

installation area

, ,

type of product

ventilation product




There are no reviews yet.

Be the first to review “TLP 200/3,0 air handling units”